Video instructions
Learn how to prepare the surface of the boat by following the steps shown in the video
Follow our step by step instructions
for surface preparation in 8 simple steps
Step 1
Apply with the filling knife or a spatula. For a large profile filling, use a wide filling knife or trowel.
Step 2
Ensure you wear suitable protective clothing, including mask and protective glasses.
Step 3
After cleaning, the surface you are going to paint must be abraded to the correct profile.
Step 4
If the surface of your boat is damaged then filling, fairing and priming may be necessary.
Step 5
Apply with the filling knife or a spatula. For a large profile filling, use a wide filling knife or trowel.
Step 6
Once the filled area has cured, sand the filled and surrounding area to the required fair profile. At the end of the process leave it to cure.
Step 7
When using a two component primer, make sure you mix the correct volumes of the base and the curing agent (always check label).
