New boat or bare boat with expoxy
Surface preparation: clean with a suitable detergent and sand with dry abrasive paper (P120). Carefully clean with water and allow the surface to dry.
Application: apply layers of the system as indicated. In case the recoating interval is exceeded, a new coat of Hempel’s Light Primer or Silic One Tiecoat must be applied accordingly
*The Silic One Tiecoat must be applied to full coverage to ensure adhesion. **After 48 hours surface must be cleaned with Pre-Clean 67602, rinsed with fresh water and allowed to dry before applying the next coat. Overcoating must be carried out as soon as possible after surface has dried.
View products
-
Hempel's Light Primer 45551
Hempel's Light Primer is a two-component, epoxy high build solvent based primer and undercoat. Helps prevent osmotic blistering in glass fibre. Protects against general corrosion.
-
Hempel's Silic One Tiecoat 27450
Hempel's Silic One Tiecoat is a high solid, silicone based tiecoat for Hempel's Silic One. Secures adhesion between Hempel's Light Primer or Hempel's Conversion Primer and Hempel's Silic One.
-
Hempel's Silic One 77450
Hempel's Silic One is a biocide free, high solid, fouling release coating. Based on silicone, a hydro gel micro layer provides a smooth, low friction surface which prevents organisms attaching to the hull and propellers. Service life of Silic One on the hull is 2 years.
How to
From basic explanations to high end tricks of the PRO's, Hempel bring useful tutorials of the yacht painting process. If in doubt, check this section out, we have just what you need.
